ECLER HMA120 is a self-powered mixer including an integrated media player and 5 external audio inputs: 3 x LINE ST, 1 MIC/LINE and 1 MIC. It features a 120W powered output that supports both low (4 Ω) and high impedance (70V, 100V) loudspeaker lines. It also includes a 2 level priority system (paging, emergencies, etc.), auto stand-by mode, AUX OUT and an additional remote control port to manage the source selection and output volume by means of WPm series wall panels.

balanced microphone input mixable with the selected music program (MIC1 and MIC2/LINE ST inputs)
3 line inputs for music sources
Integrated audio player (supporting mp3 format) with USB and SD CARD slots for media storage devices
Music program selector on the front panel: LINE1, LINE2, LINE3, MEDIA (integrated player)
Noise gate and two-level priority system (Talkover 1 and Talkover 2) for MIC1 and MIC2/LINE inputs
Independent level controls on the front panel for MIC1, MIC2/LINE and MUSIC signals
2-band EQ (BASS/TREBLE) for MIC1 and MIC2/LINE and 2-band EQ for program MUSIC signal
REMOTE port for connecting WPm series wall panels, 0 - 10VDC (source selection and volume)
MUTE port to remotely mute the unit from an external device, via dry contact closure
Auxiliary Output
Auto Stand-by function

Power output (4Ω, 8Ω, 70V & 100V steps)

• @ 1% THD
• 110 WRMS @ 4Ω
• 84 WRMS @ 8Ω
• 110 WRMS @ 70V @ 41Ω
• 110 WRMS @ 100V @ 85Ω
• PEAK
• 140 WRMS @ 4Ω
• 105 WRMS @ 8Ω
• 140 WRMS @ 70V @ 41Ω
• 140 WRMS @ 100V @ 85Ω
• Frequency response
• 70Hz - 17kHz (-3dB/4Ω)
• High pass filter 3rd order Butterworth
• 70Hz
• THD + Noise @ 1 kHz Full power
• <0.2%
• Channel crosstalk @ 1kHz
• >70dB (Inputs shorted)

AUX Output (L+R)

• Output Level / Minimum Load: -6dBV / 10kΩ
• Frequency response: 15Hz - 40kHz (-1dB)

LINE Inputs
Sensitivity / Nominal impedance

• LINE 1-2: 0dBV/>70kΩ
• LINE 3: -6dBV/>70kΩ
• Signal Noise Ratio: >87dB

MIC Inputs
Sensitivity / Nominal impedance

• MIC 1-2 (BAL): -20 to -50dBV / >4.5KΩ
• LINE* (BAL): 4.5kΩ
• CMRR @ MIC 1-2 (BAL): >70dB @ 1kHz
• Signal Noise Ratio: >60dB
• Phantom voltage/current: +15VDC / 8mA max.*

Talkover (MIC1 & MIC2)

• ATTACK TIME: 50 ms
• RELEASE TIME: 2 s
• DEPTH: 30dB
• THRESHOLD: -30dB below max

Noise Gate (MIC1 & MIC2)

• ATTACK TIME: 15 ms
• HOLD TIME: 2 s
• RELEASE TIME: 60 s
• DEPTH: 30dB
• THRESHOLD: -30dB below max

Tone control (LINE & MIC)

• BASS: 100Hz ±10dB
• TREBLE: 6kHz ±10dB

Remote

• Type: WPmVOL-SR
• Volume (Analog control): 0-10V (0V max volume)
• Input Selection (Analog control): OFF-1-2-3-4

Indicators

• Signal Present (Trigger level): -35 dB
• Clip
• Power On
• Auto Standby (Trigger time): after 2 minutes without input signal

Dimensions

• Panel WxDxH: 210x230x88mm
• Weight (Net): 5950g
• Weight (Gross): 7160g

Media Player

• Inputs Sensitivity: -5dBV
• Audio DAC: 16 bit
• S/N Ratio: 96 dB
• Dynamic range: 90 dB
• THD: 0.02%

USB and SD card interfaces

• USB host interface USB 2.0 Full Speed (12Mbps)
• Supports mass storage class devices

SD Card interface

• Supports FAT16, FAT32 and VFAT
• Multi-partion up to 1
• 65354 playable folders
• 65354 playable folders within each folder
• 65354 playable files within each folder
• Folder hierarchy: up to 8 containing the root directory
• Playable extensions
• .mp3, ,mp2, .mp1
• Sorting in alplabetical order (UNICODE)
• up to 100 folders
• up to 100 files by folder
• (folders/files over 100 sorted in the FAT order)
• MP3 decoder
• Supported MPEG: 1, 2 and 2.5
• Supported layerd: 1, 2 and 3
• Sample rates: 8k, 16k and 32k
• 11.025k, 220.05k and 44.1k 12k, 24k and 48k Bit rate
• 8 to 320 kpps and Variable bit rate (VBR)