• Combo amplifier for electric guitar
• 2 channels (Channel A and Channel B)
• 200 watts of power, can be reduced to 100 watts or 1/2 watt
• Mute function mutes internal speaker
• 2x 12" Line 6 HC100 speakers
• 12 first-class amplifier models
• Effects section with 6 delay, modulation, pitch/filter and reverb effect types each (two can be used simultaneously)
• Tap tempo switch for effects section
• 3-band tone control and presence control
• Boost control
• Noise gate
• Integrated tuner
• USB connection for Catalyst Edit app, MIDI control and for use as an audio interface
• 3.5 mm aux input for playback devices
• 6.35 mm headphone jack
• Effects loop with two switchable modes (FX Loop / Power Amp In)
• Connection for LFS2 footswitch (optionally available)
• Direct Out in XLR format with ground lift switch
  
  

12 amp voicings from Clean to high gain

With a total of 12 amp voicings borrowed from the award-winning Helix models, the Catalyst CX easily covers the entire spectrum of possible amp types and always offers guitarists of all playing styles the right sound. The amp mode Clean provides the ideal basis for undistorted sounds and for using external effect pedals, while metalheads and fans of refined distortion sounds will get their money's worth in Hi Gain mode. A 3-band equalizer and an additional boost control are also on board to further tune the basic sound.

On-board effects & FX loop

All of the Catalyst CX's amp sounds can be easily combined with the first-class integrated digital effects. Six types of delay, modulation, pitch/filter and reverb effects are available, two of which can be activated simultaneously. However, if you want to use your existing effects, you can simply switch these effects pedals between the Catalyst CX's preamp and power amp via the rear effects loop and switch them on and off at any time using the optional LFS2 footswitch.

Practical connections for every occasion

The fact that the Line 6 Catalyst CX 200 is far more than just a combo amplifier is proven by the rear connections, which serve a variety of different functions. The Catalyst CX can be connected to PCs as an audio interface via a USB port for simple, yet amazingly professional-sounding direct recordings. The USB interface can also be used for MIDI control of the amp. There is also an aux input for playback devices and an additional headphone connection on board, making the Catalyst the ideal practice platform. The three-stage power reduction including speaker muting also plays an important role here, as both recordings and practice sessions can take place at any time of day or night without any problems.

Deep-level editing via the Catalyst Edit app

If you want to get the full potential out of your Catalyst CX, the Cataylst Edit App gives you full control over all settings and parameters. The software editor, which is available for PCs and Macs as well as iOS and Android devices, is simply connected via USB and can be used to precisely adjust amp sounds to your own sound preferences, give effects the finishing touches and much more. The Catalyst Edit app also makes it easy to edit presets for later use.