Ved at fortsætte med at bruge denne side accepterer du vilkårene og betingelserne og vores brug af cookies.

      Millennia NSEQ-HF
      Millennia NSEQ-HF
      Millennia NSEQ-HF
      Millennia NSEQ-HF

      Millennia NSEQ-HF

      718,74 €
      SKAT INKLUDERET
      På lager
      Treble band from Millennia's mastering EQ NSEQ. Air EQ for noble shine on voice & instruments; corner frequencies 4.8 - 21kHz.
      Antal :
      Skriv din anmeldelse

      EU3234363840424446USXX5XSSMLXLXXLXXLArm Length6161,56262,56363,56464,5Bust Circumference8084889296101106111Waist Girth6165697377828792Hip Circumference87919599103108113118

      • Gratis fragt på tusindvis af varerGratis fragt på tusindvis af varer
      • 100% sikre online betalinger100% sikre online betalinger
      • 30 dage til rådighed til at returnere varerne30 dage til rådighed til at returnere varerne

      Air EQ in mastering quality:

      • Treble and presence processing for instruments and voice
      • Gives the signal a noble high-end character
      • Discrete Class A signal path without transformers
      • 21-step detented gain pot
      • Gain range switchable from -18/+18dB to -9/+9dB
      • Filter switchable between shelf and bell
      • Selectable balanced or unbalanced input
      • Handmade in California
      • Outstanding low noise figure (-106dBu)
      • Rugged housing
      • Minimalistic design

      Technical data:

      • Maximum output level: + 21 dBu
      • Maximum input level (EQ Flat): + 20 dBu balanced, +14 dBu unbalanced
      • Maximum input level (EQ Full Boost): + 17 dBu
      • Frequency response: +0 / -3 dB below 2 Hz to above 300 kHz
      • Maximum cut/gain (21 steps gridded): +/-18 dB (+/-9 dB with range switch on)
      • Frequency centres - (peak/shelf selectable): 4.8 k, 5.8 k, 8.0 k, 10 k, 16 k, 21 k
      • THD + Noise: 20 Hz - 30 kHz, all EQ bands switched on < .009%, typical < .003 %
      • Common Mode Rejection Ratio: 10 Hz - 20 kHz, 100 mV C.M. > 60 dB, type > 80 dB
      • Slew rate, +21 dBu Out: > 50 volts per microsecond
      • Hardwired bypass switch? Yes
      • Input impedance: 25 kiloohms
      • Minimum output load impedance: 50 ohms
      • Recommended load: > 500 ohms
      • Output impedance: 5 ohms
      • EQ amplifier: Pure discrete class A J-FETs
      • Power Consumption: +210mA with all LEDs on

      HF equalizer from the NSEQ-4 in 500 format.

      The Millennia NSEQ-HF is a single-channel analogue equalizer in API 500 format and is based on the low-noise circuitry of the NSEQ-4. The fully discrete EQ focuses on the high frequencies. It offers a choice between shelving and peak filters and a selectable operating range of six different frequencies. The gain is adjusted via the associated potentiometer with 21 detented steps. In addition, there are switches on the front panel of the NSEQ-HF to adjust the gain range and an input switch to compensate for the 6dB level difference when using an unbalanced input signal. A true hardwire bypass ensures that the signal is not affected in any way when the unit is set to Off mode. The equalizer's housing is made of sturdy metal and the front panel is made of high-quality brushed stainless steel.


      Millennia
      REC0016545-000

      Produktinformation

      Manufacturer
      Millennia
      Power Supply
      External Frame Required
      Design
      Semi-parametric
      Highpass filter
      No
      Amplifier principle
      Transistor
      Format
      Api 500
      Transformer balanced
      No
      User
      High-End
      Operation
      Active
      Character
      Linear
      Number of Bands
      1
      Lowpass filter
      No
      Fitler type
      Shelf / Bell
      Band 1
      4,8 - 21kHz
      Millennia NSEQ-HF

      Millennia NSEQ-HF

      718,74 €
      SKAT INKLUDERET