Blend from After Later Audio is a sophisticated combination of dual attenuator, dual VCA, mixer and analog logic function. The module consists of six units, which are divided into two polarizers, two VCAs, a logic section and the mix output. The attenuators together with the logic function and the VCAs can be used independently. The output signal from Attenuverter 1/2 is normalized to the CV input of VCA 1/2. By plugging in a cable this connection is interrupted and the signal from the cable has priority. The VCAs have individual outputs and are output together at the mix output. The signals from both attenuators end up in the logic section independently of the VCAs. This derives the lowest and the highest voltage value from both sources at the same time (Min/Max), compares both inputs and generates a difference control voltage (Comparator) and outputs the summed, unprocessed signal.