• Discrete Class A FET input stage with 2.2 MΩ input impedance
• Custom output transformer by Rupert Neve Designs
• Extremely wide frequency response from below 5 Hz to over 90 kHz
• Handles input levels of up to +20.5 dBu can be processed
• output impedance below 40 ohms - ideal for long cable runs
• Typical THD+N value at 1 kHz: 0.25 % at +20 dBu
• Powered via 48 V phantom power (4.5 mA)
• THRU output for parallel signal routing
• Ground lift switch for isolation and noise reduction
• Compact, road-ready steel housing
• blue LED indicates active phantom power supply
• suitable for guitars, basses, synthesizers, drum machines and more

Scope of delivery:

• 1x Rupert Neve Designs RNDI-M DI box
• 1x quick start guide

Technical precision with musical character

Built for the demands of professional use, the RNDI-M features a rugged steel housing that protects its high-quality electronics - compact enough for any p edalboard or mobile studio setup. With an input impedance of 2.2 MΩ, generous headroom of +20.5 dBu and a transformer-balanced low-Z output, the signal remains clear, low-noise and rich in detail even over extended cable runs.

The discrete Class A circuitry is completely free of ICs or digital components, delivering an rich, organically musical tone enhanced by natural second and third order harmonics. The result is a sound that's smooth, nuanced and free from harshness - faithdul to your instrument's character with added warmth and depth.

Rupert Neve's custom transformer provides passive galvanic isolation, preserving full signal dynamics while preventing interference. Practical features like a ground lift switch eliminate hum from ground loops, and the THRU output allows for parallel routing to an amp or effects chain. Power is supplied reliably via standard 48V phantom power, indicated by a blue LED on the front panel.

Technical data:

• Circuit: Active, discrete Class A FET input stage
• Input impedance: 2.2 MΩ
• Output impedance: < 40 Ohm
• Max. Input level: +20.5 dBu (8.2 V RMS)
• Max. Output level: +11.5 dBu
• Frequency response:
  • ±0.25 dB: 28 Hz - 60 kHz
  • ±1 dB: 14 Hz - 90 kHz
  • -3 dB: below 5 Hz
• THD+N (typical):
  • @ 1 kHz, +20 dBu: 0.25 % (2nd & 3rd harmonics)
  • @ 1 kHz, -20 dBu: 0.015 %
  • @ 20 Hz, -20 dBu: 0.75 %
• Noise level (22 Hz - 22 kHz, unweighted): better than -110 dBV
• Power supply: 48 V phantom power, 4.5 mA
• Outputs:
  • XLR Out (balanced, transformer-coupled)
  • THRU-Out (parallel)
• Dimensions: approx. 108 x 95 x 42 mm
• Weight: approx. 0.45 kg