• Bodypack system consisting of the receiver, bodypack transmitter and lavalier microphone
• Dual frequency operation (2.4 GHz and 5.8 GHz)
• Detachable antennas
• Very similar appearance and same functions as the earlier GLX-D version
• Bodypack transmitter compatible with TAF4F Shure microphones
• Up to 12 hours of battery life

Shure GLXD14+E/93-Z4 at a glance

The GLXD14+E/93-Z4 is a digital wireless bodypack system consisting of a receiver, bodypack transmitter and the WL93 lavalier microphone. The Set from Shure's new GLX-D+ series is the perfect solution for musicians and presenters who want to go wireless without sacrificing complexity. Every aspect of operation is managed automatically and with total reliability, so you can focus on your performance.

With the new Dual Band Wireless Technology, the receiver can operate in both 2.4 and 5.8 GHz frequency ranges, more than doubling the available bandwidth while intelligently eliminating interference. The included lithium-ion battery can be charged in a variety of ways and offers a fast-charge function with up to 12 hours of runtime (improved over the previous GLX-D generation). The bodypack transmitter is compatible with any GLX-D+ Dual band receiver as well as TA4F Shure microphones.

WL93

The WL93 is a low-cost subminiature lavalier microphone with a condenser capsule and omnidirectional pickup pattern. It is used for speech transmissions where very low visibility is important. The WL93 delivers a full, clear sound with high speech intelligibility.

Receiver

• Dimensions without antennas: 182.8 x 121.97 x 40.3 mm
• Weight: 0.310 kg
• Housing material: plastic
• Power supply: 4.5 V - 17 V, 600mA
• Noise suppression: >35 dB, typical
• Gain adjustment range: -20 to 40 dB in 1 dB steps
• Phantom power protection: yes
• connector: 6.35mm jack, XLR

Pocket transmitter

• dimensions without antenna: 115 x 66.94 x 28.51 mm
• Housing material: cast metal, black powder coated
• Weight without battery: 153.1 grams
• Power supply: 3.7 V rechargeable Li-Ion battery
• Connector: TA4M

Lavalier microphone

• Type: condenser microphone (electret bias)
• Frequency response: 50 to 20,000 Hz
• Output impedance: 3000 ohms
• Output clipping level (at 1,000 Hz): 0.25 V at 120 dB
• Total harmonic distortion: Less than 1% at 120 dB
• Maximum sound pressure level: 120 dB
• Dynamic range (maximum sound pressure level to noise level with rating curve A): 102 dB
• Output noise (equivalent sound pressure level): typically 18 dB, rating curve A
• Signal-to-noise ratio: 76 dB at 94 dB sound pressure level (IEC 651)
• Phantom power: 2 to 10 V; 5 V nominal (pin 2 to pin 3 and 4)
• Current consumption: 40 mA typical
• Cable: Black 1.27 m, attached, two-pin, shielded, terminated with miniature connector TA4F
• Black ABS thermoplastic housing with stainless steel grid grill
• Weight: 16g