The Shure Beta 98H/C is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument key noise and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

Features:

• The Beta98H/C features a 3m (10 ft.) high-flex cable with attached preamplifier (XLR connection).
• Tailored frequency response for open, natural sound reproduction
• Compact, lightweight construction provides a low degree of visibility
• Gooseneck, ratcheting swivel joint, and gooseneck angle brace allow for optimum placement and fixed positioning
• Legendary Shure ruggedness and reliability

Specifications:

• Type: Condenser (electret bias)
• Polar Pattern: Unidirectional (cardioid)
• Frequency Response: 20 - 20,000 Hz
• Output Impedance: Rated at 150.0 ohms (actual)
• Recommended minimum load impedance: 1 kilohm. May be used with loads as low as 150 ohms with reduced clipping level
• Output Level (0 dB = 1 volt per Pascal): Open Circuit Voltage -56 dB (1.6 mV)
• Output Clipping Level (at 1kHz, THD < 1%): 2.5 kilohm load: 11 dBV (3.5 V), 1.0 kilohm load: 3 dBV (1.4 V)
• Maximum SPL: 2.5 kilohm load: 163 dB 1.0 kilohm load: 155 dB
• Dynamic Range (maximum SPL to A-weighted noise level): 132 dB (2.5 kilohm load)
• Signal-to-noise ratio: 63 dB at 94 dB SPL (IEC 651)
• Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector
• Recommended Operating Voltage: 11 to 52 Vdc Phantom
• Environmental Conditions: Operating temperatures: -7 degrees C to 49 degrees C (20 degrees F to 120 degrees F)
• Net Weight: Microphone w/cable and preamplifier: 156 g (5.5 oz.)