Features

• Dual-element instrument microphone
• Dynamic and condenser capsule in one housing
• Separate outputs for both capsules
• Three switchable sound characteristics
• For kick drum and other bass-heavy sources
• Cardioid pickup pattern

Three switchable sound characteristics

• Dynamic =///= condenser: Both elements are neutral.
• Dynamic +///= Condenser: Dynamic element boosts frequencies between 3 and 5 kHz, condenser side remains neutral.
• Dynamic +//+ Capacitor: Dynamic element takes over the 3-5 kHz range, capacitor is responsible for the frequencies from 70-150 Hz. Overall, this mode gives you the most powerful kick sound you've ever heard.

Technical data

• Type: Dynamic - immersion coil, condenser, permanently polarized
• Acoustic transducer principle: Pressure gradient receiver
• Transducer Ø: 31.7 mm, 1.25 in
• Transducer Ø: 22.4 mm, 0.88 in
• Polar pattern: cardioid
• Frequency response (dynamic): 20 to 16,000 Hz
• Frequency response (condenser): 20 to 20,000 Hz
• Sensitivity = // = FFR: 0.4 mV/Pa (-69 dBV), Dynamic, 2mV/Pa (-54 dBV), Condenser
• Sensitivity + // = Dynamic EFR: 0.4 mV/Pa, -69 dBV/Pa, Dynamic, 2 mV/Pa, -54 dBV/Pa, Capacitor
• Sensitivity + // + Dual EFR: Condenser and Dynamic matched at 1 mV/Pa, -60 dBV
• Equivalent noise level: 28 dB (A)
• Limiting sound pressure level k < 0.5 %: 150 dBSPL, 0 dB pre-attenuation
• Dynamic range (capacitor): 122 dB
• Preattenuation: 0 dB, -10 dB, -20 dB
• Nominal impedance (dynamic): 500 Ohm
• Nominal impedance (capacitor): 200 Ohm
• Supply voltage: 48 V ± 4 V
• Current consumption: 2 mA
• Connector: 3- and 5-pin XLR, gold-plated
• Cable: 1.5 m (4.95') dual shielded Y-cable, 5-pin XLR into two 3-pin XLRs
• Dimensions: 71 dia. x 158 mm, 2.8 dia. x 6.2 in
• Weight: 755 g, 27.3 oz