Palmer wipper
83,30 €
ADÓT TARTALMAZ
Passive DI box, balancing and impedance matching for guitar/bass/keyboard/synthesizer, eliminates hum loops
Ingyenes kiszállítás több ezer termékre
100%-ban biztonságos online fizetés
30 nap áll rendelkezésre az áru visszaküldésére
Passive DI box
- Balancing and impedance matching for guitar/bass/keyboard/synthesizer
- Eliminates hum loops thanks to galvanic isolation via transformer
- Extremely fail-safe, no power supply needed
- Link connector for passing the input signal to the amplifier
- Second jack connector can also be used to sum two input signals
- Unadulterated, low-noise sound
- Handles high input levels without distortion
- Switchable 30 dB pad for extremely high input levels (e.g. amplifier output)
- Road-ready housing made of aluminum and sheet steel
- Incl. a rewritable tour label to attach to the back of the wipper
- Engineered in Germany
Problem solver with the simplest handling
The Palmer wipper is a single-channel passive DI box with a high-quality transformer that handles even rich levels without distortion or loss of sound. With its 10:1 gear ratio, it provides optimal impedance and level matching for connecting instrument signals from guitar, bass, keyboard or synthesizer to a balanced microphone input .
The galvanic isolation ensures that no hum loops occur. Your sound remains unaltered: brilliant and low-noise, without interference. Thanks to a switchable pre-attenuation of 30 dB, the wipper can even be looped in between the amplifier output and the loudspeaker.
The Palmer wipper is a problem solver with the simplest handling. Due to its passive design, it requires neither batteries nor phantom power. This makes it extremely fail-safe, especially since its aluminum/steel housing is virtually indestructible. With its high-quality transformer, it also cuts a fine figure at studio.
Technical data
General
- Type: passive
- Number of channels: 1
- Transformer isolated: yes
- Number of inputs: 2
- Input type: unbalanced
- Input connectors: 6.3 mm jack
- Number of outputs: 1
- Output type: balanced
- Output connectors: XLR
- THRU - outputs per channel: 1
- Input attenuation (pad): 0 / 30 dB
- Ground lift switch: Yes
- Additional features: Mono summing
- Enclosure: Aluminum continuous casting
- Dimensions (W x H x D): 50 x 140 x 68 mm
- Weight: 0.43 kg
- Ambient temperature (operating): - 20 - 70 °C
- Relative humidity: <80% (non-condensing)
- Accessories (included): Label (tour label), rubber feet
Audio
- Max. Input level (< 1% THD, 20 Hz): +24 dBu
- Max. Input level (< 1% THD, 1 kHz): +32 dBu
- Frequency response (±0.2dB, relative 1kHz): 10 Hz - 60 kHz
- Input impedance (1 kHz, setting: 0 dB pad, THRU): 47 kOhm
- Output impedance (1 kHz, Setting:0 dB Pad, THRU): 33 Ohm
- THD (30 Hz, +4 dBu, unity, unweighted): < 0,02 %
- THD (1 kHz, +4 dBu, unity, unweighted): < 0,0007 %
- IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu): < 0,002 %
- Transformer ratio: 10 : 1
PAH0023017-000
Adatlap
- Signal Processing
- Passive
- Manufacturer
- Palmer
GYAKRAN EGYÜTT VÁSÁROLT
TERMÉKEK AZONOS MÁRKÁBÓL
Passive DI box, balancing and impedance matching for guitar/bass/keyboard/synthesizer, eliminates hum loops
Palmer wipper
83,30 €
ADÓT TARTALMAZ