• Multiple Resonance Filter
  
• Clone of the Moog MF-105 MIDI MuRF
• 8 filter bands
• 2 frequency ranges
  
• Distortion
  
• Pattern animator (2x12 patterns)
• Envelope for each frequency band
• LFO
• CV inputs for rate, mix, envelope & LFO/sweep
• Tap/Step clock input
• Audio In (mono)
• Audio Out (mono/stereo)
• Complete MIDI implementation
• MIDI In
• USB MIDI

Enough connections for analog setups

The connections are the same as on the original: there are four CV/expression inputs for the Rate, Mix, Envelope and LFO/Sweep parameters. This allows the parameters to be controlled via an expression pedal or any control voltages from the modular system. The audio input is mono, the audio outputs have a special feature: if you only use the L/Mono socket, all filter bands are routed to this output; if you also use the right socket, the filter bands 200, 450, 1K and 2.2K are distributed to the left output and 300, 675, 1.5K and 3.4K to the right output. An external clock signal (e.g. from an analog sequencer) can be connected to the tap/step input. The pattern animator can be synchronized to MIDI Clock via the MIDI input and all parameters can also be controlled via Control Change commands. The USB port is primarily intended for configuring the pedal with the SynthTribe-App .