Doepfer A-111-3 Micro Precision VCO
      Doepfer A-111-3 Micro Precision VCO
      Doepfer A-111-3 Micro Precision VCO
      Doepfer A-111-3 Micro Precision VCO

      Doepfer A-111-3 Micro Precision VCO

      136,85 €
      TAXĂ INCLUSĂ
      în stoc
      The Doepfer A-111-3 Micro Precision VCO/VCLFO is an analogue VCO/LFO, with a 4HP width, a fully analogue design, a triang...
      Cantitate :
      Scrie o recenzie

      EU3234363840424446USXX5XSSMLXLXXLXXLArm Length6161,56262,56363,56464,5Bust Circumference8084889296101106111Waist Girth6165697377828792Hip Circumference87919599103108113118

      • Livrare gratuită pentru mii de articoleLivrare gratuită pentru mii de articole
      • Plăți online 100% sigurePlăți online 100% sigure
      • 30 de zile disponibile pentru returnarea bunurilor30 de zile disponibile pentru returnarea bunurilor

      VCO / LFO

      The Doepfer A-111-3 Micro Precision VCO/VCLFO is an analogue VCO/LFO, with a 4HP width, a fully analogue design, a triangle core, and Tune/XM/PW controls. The Doepfer A-111-3 Micro Precision VCO has a wide frequency range, tracking at least ten octaves, along with multiple waveforms, connectivity and oscillator synchronization. It can be easily integrated into a Eurorack Modular system. Its circuit of A-111-3 is similar to the high-end VCOs A-111-2 Doepfer, but with reduced functions and controls.

      The A-111-3 has two elements for frequency adjustment - a switch between LFO and VCO mode and a tune-controller whose scope is jumper selectable. The XM-controller can be used as Finetune when nothing is plugged into the XM jack. The VCO has a triangular core, generated from the sawtooth and sine pulse. The waveforms are almost ideal, and without glitches. The pulse width can be adjusted with a knob from 0% to 100% and naturally modulated. For oscillator synchronization there is an input whose type is selected with a jumper from soft to hard sync. The two syncs differ distinguishes it as the hard sync is cutting and biting.

      The main features of the Doepfer A-111-3 Micro Precision VCO/VCLFO include:

      • Analogue VCO/LFO
      • Triangle Core
      • Min. 15 Octaves Pitch Range per Mode: VCO: typ. 0.5 Hz - 20 kHz; LFO: typ. 0.001 Hz - 40 Hz
      • Range Switch
      • 24~ Octaves Total in Both Modes (typ. 0.001 Hz - 20kHz)
      • Perfect 1V/Octave Tracking Over Min. 10 Octaves (typ. 16Hz - 16kHz in VCO Mode)
      • Exponential Frequency Modulation XM Input with Attenuator
      • Linear Frequency Modulation Input LM (without Attenuator), DC Coupled
      • Manual Pulsewidth Control PW, Adjusts Pulsewidth from 0% (Output = Fixed at "Low" State) up to 100% (Output Fixed at "High" State)
      • Pulsewidth Modulation Input PM (without Attenuator), About 5Vpp Required for Full PW Range
      • Sync Input SY (Selectable Hard or Soft Sync via Internal Jumper)
      • Waveform Outputs: Sawtooth, Rectangle, Triangle
      • Near "Perfect" Waveforms (no Glitches)
      • LED Display in LFO Mode)
      • Only 4HP Panel
      Doepfer
      SYN0005440-000
      Doepfer A-111-3 Micro Precision VCO

      Doepfer A-111-3 Micro Precision VCO

      136,85 €
      TAXĂ INCLUSĂ